Product Category: A Family - 66% Fluorine Dipolymers
Use Our Chemicals Product Finder
Chemicals Product Finder
Vanderbilt Chemicals, LLC is fortunate to be the Distributor of Rubber Polymers for three "World Class" manufactures: DuPont Neoprene Polychloroprene, Vamac® Ethylene Acrylic Elastomer (AEM) and Viton™ Fluoroelastomer - ExxonMobil Chemical, Exxon™ Butyl, Exxon™ Bromobutyl, Exxon™ Chlorobutyl and Vistalon™ Ethylene Propylene Diene (EPDM) - Zeon Chemical Nipol® IR Polyisoprene
VITON™ A-601C Sheet
Fluoroelastomer
Viton™ A-601C Fluoroelastomer is a new generation incorporated cure "A-family" dipolymer designed for compression molding of sealing devices that must meet major fluoroelastomer specifications.
VITON™ A-700 Pellets
Fluoroelastomer
This gum provides improved compression set resistance, good flow for compression molding, good mold release, less mold fouling, improved compression set resistance, and improved tear properties.
VITON™ A-401C Sheet
Fluoroelastomer
Viton™ A-401C Fluoroelastomer is an incorporated cure "A-family" dipolymer designed for compression molding of sealing devices that must meet major fluoroelastomer specifications.
VITON™ A-361C Sheet
Fluoroelastomer
Viton™ A-361C* is an incorporated cure "A-family" dipolymer designed for the injection and transfer molding of parts requiring better metal adhesion along with the fluid and heat resistance characteristics typical of fluoroelastomers.
VITON™ A-500 Sheet
Fluoroelastomer
Viton™ A-500 Fluoroelastomer is a new generation "A-family" gum polymer that provides improved processing when compared with existing fluoroelastomers.
VITON™ A-200 Sheet
Fluoroelastomer
Viton™ A-200 Fluoroelastomer is an "A-family" gum polymer that demonstrates improved processing when compared with existing fluoroelastomers. Viton™ A-200 is designed for use with the clean molding bisphenol curative, Viton™ Curative No. 50.
VITON™ A-100 Sheet
Fluoroelastomer
Viton™ A-100 is especially designed for use with Viton™ Curative No. 50. It may be blended with other Viton™ types to enhance flow and processibility. Compared with other "A-family" dipolymers, Viton™ A-100 provides ultralow viscosity, improved processing with increased mold flow and can be blended with other Viton™ types to enhance processibility and improve flow.
VITON™ A-331C Sheet
Fluorine Dipolymer
Viton™ A-331C is an incorporated cure "A-family" dipolymer designed for the injection and transfer molding of parts requiring improved demolding "hot tear" resistance.
VITON™ A-HV Sheet
Fluoroelastomer
Viton™ A-HV is a high viscosity analog of Viton™ A and gives vulcanizates having the highest tensile strength and best resistance to compression set.