Thiazole Accelerators
C.A.S.E.
Product Category:
Thiazole Accelerators
Use Our Chemicals Product Finder
Chemicals Product Finder
-
Petroleum
- Engine Oil Additives
- Grease Additives
- Driveline Additives
- Metal Working Fluid Additives
- Gear Oil Additives
- Turbine Oil Additives
- Hydraulic Oil Additives
- Compressor Oil Additives
- Food Grades
- Ester Base Stocks
-
Rubber
- Accelerators and Vulcanization Agents
- Antidegradants
- Mineral Fillers
- Plasticizers and Processing Aids
- Tackifiers
- Polymer Modifiers
-
Rubber Polymers
- Exxon™ Butyl Polymers and Halogenated Butyl Rubber (BIIR CIIR)
- Neoprene Polychloroprene (CR)
- Vistalon™ Ethylene Propylene Diene (EPDM) Rubber
-
Tecnoflon® fluoroelastomer (FKM) and perfluoroelastomer (FFKM)
- Raw fluoroelastomer copolymers – N series
- Cure incorporated fluoroelastomer copolymers – FOR series, 66% Fl
- Raw fluoroelastomer terpolymers – T & TN series
- Cure incorporated fluoroelastomer terpolymers – FOR & FOR TF series
- Peroxide curable fluoroelastomer terpolymers – P series
- Low temperature peroxide curable fluoroelastomers – PL series
- Very low temperature peroxide curable fluoroelastomers – VPL series
- Perfluoroelastomers – PFR series
- VAROX™ Organic Peroxide Crosslinking Agents
- Miscellaneous
- The Vanderbilt Rubber Handbook and CD
- The Vanderbilt Latex Handbook
- Plastics
- Polyurethanes
- C.A.S.E.
Adhesives are expected to withstand many stresses and strains in numerous applications. Crosslinking the polymer not only increases the overall strength of the adhesive, but can be especially useful in increasing the cohesive strength of the finished product.
VANAX® 808 HP
Accelerator
NR, SBR, CR, IIR, and latex accelerator of intermediate strength. Activator for acidic accelerators.
ZETAX® ZMBT
Accelerator
This product is the preferred secondary accelerator in latex foam curing systems, and can also be used as a primary accelerator in natural and synthetic rubbers.