Product Category:
Light Stabilizers
Use Our Chemicals Product Finder
Chemicals Product Finder
-
Petroleum
- Engine Oil Additives
- Grease Additives
- Driveline Additives
- Metal Working Fluid Additives
- Gear Oil Additives
- Turbine Oil Additives
- Hydraulic Oil Additives
- Compressor Oil Additives
- Food Grades
- Ester Base Stocks
-
Rubber
- Accelerators and Vulcanization Agents
- Antidegradants
- Mineral Fillers
- Plasticizers and Processing Aids
- Tackifiers
- Polymer Modifiers
-
Rubber Polymers
- Exxon™ Butyl Polymers and Halogenated Butyl Rubber (BIIR CIIR)
- Neoprene Polychloroprene (CR)
- Vistalon™ Ethylene Propylene Diene (EPDM) Rubber
-
Tecnoflon® fluoroelastomer (FKM) and perfluoroelastomer (FFKM)
- Raw fluoroelastomer copolymers – N series
- Cure incorporated fluoroelastomer copolymers – FOR series, 66% Fl
- Raw fluoroelastomer terpolymers – T & TN series
- Cure incorporated fluoroelastomer terpolymers – FOR & FOR TF series
- Peroxide curable fluoroelastomer terpolymers – P series
- Low temperature peroxide curable fluoroelastomers – PL series
- Very low temperature peroxide curable fluoroelastomers – VPL series
- Perfluoroelastomers – PFR series
- VAROX™ Organic Peroxide Crosslinking Agents
- Miscellaneous
- The Vanderbilt Rubber Handbook and CD
- The Vanderbilt Latex Handbook
- Plastics
- Polyurethanes
- C.A.S.E.
Polymers are expected to withstand many stresses and strains, including heat and long-term storage. The antioxidants and antioxidant synergists supplied by Vanderbilt Chemicals, LLC will greatly improve the heat and oxidative resistance of these compounds, which in turn will help with the retention of original physical properties. The additives listed below can help to limit, if not eliminate, the damaging effects of these stresses on the performance of the adhesives.
SABO®STAB UV 62 Powder
Light Stabilizer
SABO®STAB UV 62 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications.
SABO®STAB UV 65
Light Stabilizer
SABO®STAB UV 65 is a low-molecular-weight hindered amine light stabilizer (HALS) that is effective in a broad range of plastics and coatings.
SABO®STAB UV 70
Light Stabilizer
SABO®STAB UV 70 is a low-molecular-weight hindered amine light stabilizer (HALS) that is effective in a broad range of polymers, particularly in thick-section applications.
SABO®STAB UV 62
Light Stabilizer
SABO®STAB UV 62 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications.
SABO®STAB UV 119
Light Stabilizer
SABO®STAB UV 119 is a high-molecular-weight hindered amine light stabilizer (HALS) that is effective in a broad range of polymers and applications, including PE, PP, TPO, styrenic polymers (ABS, ASA), polyamide fibers, polyurethanes, and elastomers.
SABO®STAB UV 79
Light Stabilizer
SABO®STAB UV 79 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications.
SABO®STAB UV 94
Light Stabilizer
SABO®STAB UV 94 is a polymeric hindered amine light stabilizer (HALS) that is effective in a broad range of polymers and applications.